Gidget I has a smaller opening size (17 ½” W vs 7 ?” D) compared to the large opening on Gidget II (23 ½” W x 12” D)
Gidget II Table features two wheels for easier portability when folded flat. Gidget I does not have wheels but can easily be transported with collapsible legs.
Gidget I is made of particle board with steel locking legs. Gidget II is made with denser MDF (medium density fiberboard) and steel locking legs.
Gidget II will require a custom made insert for her opening. Gidget I has a smaller opening, and may not need an insert if your machine is deep enough to fill most gaps.
40″ W x 19 ¾” D x 28 ¼” H
Dimensions with Legs Folded:
40″ W x 19 ¾” D x 4 ½” H
The Gidget I Table will accommodate sewing machines no larger than:
17 ½” W (left to right)
7 ?” D (front to back)
If your machine is equal to or less than those measurements, it will fit the opening.
Construction: Melamine/MDF with Steel Legs
Is a custom made, machine specific insert available?
Yes, it may be available.
Since each custom insert is custom made, you’ll need to answer a few questions about your machine so we can make the proper fit.
Feel free to call us at 800-533-7347 or email CS@arrowcabinets.com that information regarding your machine so we can find out if an insert is available or can be made.
Must I have a custom insert to sew in the Gidget table?
No. It is not necessary to order a custom insert for the Gidget table. You can move your machine so the left and front edges fit the left front corner and your fabric will be supported for sewing.
What type of custom insert is available for a Gidget?
The current version of the Gidget I does not have a beveled edge which means there is no lip on the machine opening to hold an insert. Therefore, when filling out the custom insert questionnaire, you’ll indicate your table/cabinet does not have a beveled edge.
Therefore, the custom insert we made will have a lip on the front, left, and back so the insert will sit on top of the tabletop, not inside the opening. The height difference between the table surface and surface of the insert will be approximately 1/8”.
If you have an older version of the Gidget I table, there is a beveled edge. Therefore, when filling out the custom insert questionnaire, you’ll indicate your table/cabinet does have a beveled edge.
The cabinet is fully assembled and shipping one box
Gidget I weighs a total of 35 pounds
Cabinets, tables, and chairs cannot be shipped to a PO Box
If ordered, a custom insert will be shipped separately and delivered three-four weeks later
The Gidget I arrives fully assembled, however, we have a few helpful documents to make your set-up easier. You may also download documents and save them to your computer.