ARROW Norma Jean Sewing Cabinet (Choose Your Finish)

FEATURES

• Storage Includes:
  • Four large drawers
  • Four accessory trays on the door
  • A recessed compartment to the right of the sewing well
• Two fold out leaves supported by sturdy supports create additional work surface for all your sewing projects
• Adjustable three-position hydraulic lift:
  • Moves your machine into three positions: free-arm, flatbed and storage
  • Designed with gas strut mechanism with a 45-pound sewing machine capacity
• Stands on four casters, two non-locking and two locking, which allows you to move it where you need it then lock it into place
• Sewing machine opening is beveled
• Optional Custom Machine Insert for a flush surface (sold separately)
• Available in Four Finishes: Oak Grain, Cherry, Crisp White, and Black
• Additional information can be found on our Norma Jean Cabinet informational sheet
• Available with optional quilt leaf
• Arrow Sewing Furniture Ten-Year Limited Warranty

CABINET SPECIFICATIONS

• Cabinet Dimensions:
  • Dimensions Open: 81 ½” W x 20″ D x 30 ½” H
  • Dimensions Closed: 40 ½” x 20” D x 31 ¼” H
• Drawer Dimensions (4)
  • 9 ½” W x 15 ½” D x 3” H
• Optional Quilt Leaf Dimensions:
  • 38 ¾” W x 20 ½” D x 30 ¼” H
• Norma Jean Cabinet is ideal for Sewing Machines:
  • Up to 45 pounds
  • Maximum Machine Dimensions:
    • Width: 23 ¾” (left to right)
    • Depth: 12 ½” (front to back)
    • Height: 14 ½”
    • Sewing machine opening is beveled
  • *Please measure your machine and include knobs, plugs, etc. that extend beyond the body of the machine
• The Norma Jean features tough melamine laminate, MDF, and composite wood

SEWING MACHINES THAT DO NOT FIT NORMA JEAN SEWING CABINET

We are aware of the following sewing machines that are too large to fit into the Norma Jean Cabinet:

• BabyLock – Destiny and Solaris
• Bernina – Series 7-780, 750 QE, 710
  • The machines will fit the opening and platform of the cabinet but the height of the machine does not allow the top right leaf to close completely when the machine is in storage position.
• Brother – Dream VX8500D and Luminaire
• Janome – Horizon Memory Craft 15,000
  • The machine fits the platform of the cabinet in flatbed position (a custom insert is available) but you will have to move the sewing machine from right to left to lower into the storage position because of the extension of the front support leg of the machine. Also, the knee lifter lever cannot be used with a sewing cabinet due to the length of the lever and how the machine sits on the platform in flatbed position.
• Elna –  eXpressive 920
  • The machine fits the platform of the cabinet in flatbed position (a custom insert is available) but you will have to move the sewing machine from right to left to lower into the storage position because of the extension of the front support leg of the machine. Also, the knee lifter lever cannot be used with a sewing cabinet due to the length of the lever and how the machine sits on the platform in flatbed position.

Please be advised that this list may change as new models are introduced. It is extremely important to measure your machine prior to ordering to make sure it will fit.

SHIPPING INFORMATION

• The cabinet is shipped ready to assemble in three separate boxes
• Norma Jean weighs a total of 209 pounds
• The optional quilt leaf ships in a separate box, weighing 22 pounds
• Cabinets, tables, and chairs cannot be shipped to a PO Box
• If ordered, a custom insert will be shipped separately and delivered three-four weeks later
• Norma Jean is available fully assembled at Arrow Dealers

ASSEMBLY INSTRUCTIONS

Assembly instructions are included with the cabinet. You may also download the Norma Jean Cabinet manual and save it to your computer. For assembly, you’ll need:

• Phillips screwdriver with #2 head or power screwdriver
• Hammer/mallet
• Optional:
  • WD-40
  • Adjustable wrench

**If you have the new Norma Jean design with wooden drawers, you can find the manual here.